Name: 9th EUV-FEL Workshop
Start: 2025-02-04T13:00:00+09:00
End: 2025-02-04T17:00:00+09:00
Location: Tokyo Tech Front (Kuramae Kaikan), Institute of Science Tokyo

9th EUV-FEL Workshop

Tuesday, 4 February 2025 - 13:00

Monday, 3 February 2025
Tuesday, 4 February 2025
13:00 Openning Remarks - Prof. Shinichiro Michizono (KEK, Executive Director)
Openning Remarks
- Prof. Shinichiro Michizono (KEK, Executive Director)
13:00 - 13:10
13:10 Greeting - Dr. Tetsuyuki Muramatsu (MEXT)
Greeting
- Dr. Tetsuyuki Muramatsu (MEXT)
13:10 - 13:15
13:15 Target of the workshop - Prof. Hiroshi Kawata (KEK_Secretary of the workshop)
Target of the workshop
- Prof. Hiroshi Kawata (KEK_Secretary of the workshop)
13:15 - 13:25
13:25 [Key-note Lecture] EUV Lithography: Current Research and Perspective - Dr. Bruno La Fontaine (Director, The Center for X-ray Optics (CXRO) , LBNL)
[Key-note Lecture] EUV Lithography: Current Research and Perspective
- Dr. Bruno La Fontaine (Director, The Center for X-ray Optics (CXRO) , LBNL)
13:25 - 14:05
With high-NA EUV Lithography entering its industrial R&D phase at various pilot lines this year, there are still a number of significant technical and scientific challenges to be addressed to ensure its success in manufacturing. I will describe some of these challenges, such as the tradeoffs between sensitivity, resolution and LER for patterning materials, as well as that of the mask 3D effects. Looking forward, there appears to be a continued need to support further 2D scaling for leading-edge devices. I will provide a perspective on the potential solutions for extending EUV lithography toward such a goal. In particular, I will give an update on the initial Hyper-NA R&D effort and the possibilities of using shorter actinic wavelengths (e.g., ‘Beyond EUV’ or BEUV), with a particular emphasis on the research needed for patterning materials, sources, optics and masks.
14:05 Coffee break
Coffee break
14:05 - 14:25
14:25 R&D Status on Two-mirror In-Line Projector for OIST EUV lithography - Prof. Tsumoru Shintake (OIST)
R&D Status on Two-mirror In-Line Projector for OIST EUV lithography
- Prof. Tsumoru Shintake (OIST)
14:25 - 14:55
At OIST, we have started R&D on a highly energy-efficient two-mirror in-line projector with a simplified illumination system. The EUV source power can be reduced by 1/10 compared to the current six mirror EUV projector system. The required EUV power is 20 watts for a process speed of more than 100 wafers per hour. The proposed projector achieves 0.3 NA (13 mm field) and can be mounted in a cylindrical tube configuration similar to a DUV projector, providing superior mechanical stability, easier assembly/maintenance and low cost. The EUV light is directed in front of the mask by two narrow cylindrical mirrors on either side of the diffraction cone, called the dual line field, which provides average normal illumination and reduces the mask 3D effect. The theoretical resolution limit is 16 nm (0.3 NA), image reduction factor x4 and object image distance (OID) 1500 mm.
14:55 The Must Light Source - Prof. Yosuke Honda (Accelerator Laboratory, KEK)
The Must Light Source
- Prof. Yosuke Honda (Accelerator Laboratory, KEK)
14:55 - 15:25
Energy-Recovery Linac (ERL) based Free-Electron Laser (FEL) has been a promising solution for the high-power EUV light source for future semiconductor lithography. Considering the increasing demands of semiconductors and the roadmap for smaller nodes, realization of a higher power EUV (and BEUV) light source at high efficiency has been strongly required. At KEK, we have been designing ERL-EUV-FEL based on our experience of construction and operation of a test ERL accelerator. We will present the design of the accelerator system and its expected performance from the basic principle. It will explain the technical key items in the accelerator development planned in next 5 years.
15:25 Coffee break
Coffee break
15:25 - 15:45
15:45 Development of EUV / DUV Source for Semiconductor Manufacturing and its Application - Prof. Hakaru Mizoguchi (QPTRC, Kyushu University)
Development of EUV / DUV Source for Semiconductor Manufacturing and its Application
- Prof. Hakaru Mizoguchi (QPTRC, Kyushu University)
15:45 - 16:15
In this conference, we will report about new EUV research activities in Kyushu-Univ. in Japan. 1st topic is new EUV exposure research center: named “EUV Photon Co.. This organization will support material development of material industry of EUV lithography, for example photo-resist, and photo mask and so on. We prepare EUV light source and exposure optical system and vacuum chamber system for this exposure. In this presentation we will report latest preparation of this organization. 2nd topic is new high power EUV source research program which has been preparing in Kyushu-University. Since 2003 we corroborate EUV source research with Gigaphoton. We are pioneer of com-bination of pulsed CO2 laser and Sn droplets, dual wavelength pico second laser pulses for shooting and debris mitigation by magnetic field have been applied We have demonstrated high average power >300W EUV power with CO2 laser more than 27kW at output power in cooperation with Gigaphoton and Mitsubishi Electric up to now 2). Also we are thinking about the Sn plasma dynamics which dom-inate the EUV emission by using Thomson Scattering (TS) measurement. Last year our group an-nounced possibility of 10% conversion efficiency with simulation and experiment (fig.3)3）.These re-sults mention that there is still sufficient potential to increase EUV output power and conversion effi-ciency in near future At the conference, we will report latest update of above two topics.
16:15 Closing address - Prof. Sunao Ishihara (Representative of EUV-FEL Light Source Study Group for Industrialization)
Closing address
- Prof. Sunao Ishihara (Representative of EUV-FEL Light Source Study Group for Industrialization)
16:15 - 16:20
16:20 Photo-session - - -
Photo-session
- - -
16:20 - 16:25