Maintenance : Conference Indico will be unavailable for several seconds, during a maintenance work between 12:30 - 13:00 on Wed, 6th July 2022 (JST).
MTCA workshop for accelerator and physics in Japan

from Tuesday, 26 October 2021 (10:00) to Thursday, 28 October 2021 (17:40)
Virtual (Zoom)

        : Sessions
    /     : Talks
        : Breaks
26 Oct 2021
27 Oct 2021
28 Oct 2021
AM
10:00
Openning (until 10:10) ()
10:10 加速器に広がるMicroTCAプラットフォーム ~ MicroTCAの基礎と概要 ~ - 白井 野之   ()
10:50 AMC の作り方 - 漁師 雅次   ()
11:30 国産MCHの開発経験談 - 箭原 正道 (サンリツオートメイション株式会社)   ()
10:00
Openning (until 10:10) ()
10:10 Welcome address - Takashi Kobayashi (Director of the J-PARC Center)   ()
10:40 μTCA(MTCA.0) FPGA-Boards Development and Applications at KEK-Tsukuba - Tetsuya Kobayashi (KEK)   ()
11:10 Timing synchronization system for beam injection from SACLA to SPRING-8 storage ring - Takashi Ohshima (JASRI)   ()
11:30 MTCA.4 based LLRF control systems for J-PARC synchrotrons - Yasuyuki Sugiyama (KEK)   ()
11:50 --- Lunch break ---
10:00
From orgnizers (if any) (until 10:10) ()
10:10 MicroTCA.4 projects at Sirius light source - Daniel Tavares (Sirius/LNLS )   ()
10:40 Survey on MTCA in Japanese accelerators - Fumihiko Tamura (J-PARC Center)   ()
11:00 Timing and low level RF control system of new injector LINAC for NEW SUBARU - Eito Iwai (JASRI)   ()
11:20 Uniform communication over the MTCA interconnect and network - Kazuro Furukawa (KEK)   ()
11:40 LLRF system based on MTCA.4 boards for the J-PARC Linac - Kenta Futatsukawa (KEK)   ()
PM
12:10 --- 昼食休憩 ---
13:30 MTCA シェルフ開発・製作について - 森本 正治 (株式会社ユーバー)   ()
14:10 MTCA.4 規格 RTM、eRTMの製作 - 矢上 重男 (株式会社キャンドックスシステムズ)   ()
14:50 SPring-8 / SACLA における高周波制御とビーム診断での MTCA.4 の活用 - 前坂 比呂和 (理化学研究所 放射光科学研究センター)   ()
15:30 --- 休憩 ---
15:50 Zoom 日本語通訳の説明   ()
16:00 Electromagnetic Compatibility (EMC) and Analog Design Aspects in MicroTCA Crates (日本語通訳付き) - Frank Ludwig (DESY)   ()
13:30 DMMC Stamp and WIENER power supply - Tomokazu Murakoshi (Embeck)   ()
13:50 Next-generation open architecture MTCA field and Vadatech MTCA.4 lineup introduction - Moriaki Hakuta (LHS)   ()
14:10 Realization of high precision analog pattern output module by MicroTCA.4 - Naoki Kawamura (Hitachi Zosen Corporation )   ()
14:30 Development of a LLRF control system at WERC - Tetsuro Kurita (WERC)   ()
14:50 --- Break ---
15:20 Synchronization of several EtherCAT networks by new multi-network EtherCAT AMC client - Herbert Erd (N.A.T)   ()
15:40 More flexible and cost-efficient x86 and non-x86 based compute power for MicroTCA systems - Herbert Erd (N.A.T)   ()
16:00 MTCA.4 Crates: Introduction to the hardware infrastructure - Christian Ganninger (nVent)   ()
16:20 Overview of MMC stamp software development kit - Patrick Huesmann (DESY)   ()
16:40 Status and future plans of the MicroTCA.4 compliant LO and CLK generation module - Uros Mavric (DESY)   ()
12:00 --- Lunch break ---
13:30 Status of MTCA.4 standard based LLRF control board for the linear accelerator of the STF-2 and the ILC - Toshihiro Matsumoto (KEK)   ()
13:50 Adoption of the micro-TCA to the next KEK-PF LLRF system - Daichi Naito (KEK)   ()
14:10 Utilization of a unique MicroTCA.4-based digitizer for monitoring comb-like beam at the J-PARC Linac - Ersin Cicek (KEK)   ()
14:30 Planned upgrade of the LLRF system at the STF vertical test stand at KEK - Mathieu Omet (KEK)   ()
14:50 --- Break ---
15:20 4th Generation NAT-MCH - Herbert Erd (N.A.T)   ()
15:40 Digitizers for Big Physics - Kacper Matuszynski (Teledyne SP Devices )   ()
16:00 Experience with MTCA.4 LLRF systems at DESY - Christian Schmidt (DESY)   ()
16:20 Development of the MicroTCA specification: Preparing the next generation - Kay Rehlich (DESY)   ()
16:40
Closing remarks (until 17:00) ()